Loading 3Com Enterprise Mibs; Configuring The Tftp/Ftp Server - 3Com TRANSCEND EM/NT 6.3 Installation Manual

30 C 3: P
HAPTER REPARING TO
Loading 3Com
Enterprise MIBs
Configuring the
TFTP/FTP Server
U T W
SE RANSCEND ORK
HP OpenView comes with predefined directories, and it places MIBs in
different directories. Transcend ignores any MIBs that are present in other
directories, and installs all the Transcend MIBs into the
<transcendhome>\common\ov\mibs\
the MIBs that are installed by Transcend and not those found in the
OpenView default directories.
To load individual Transcend MIBs into OpenView:
1 From OpenView, select the Control menu.
2 Choose SNMP Manager, Manage Database.
3 Select the MIBs that you want to load.
To load all Transcend MIBs into OpenView, execute the following
command:
<transcendhome>\common\ov\mibs\loadmib.exe
Installation of MIBs can take several hours to complete. You may proceed
with using Transcend while the MIBs are being loaded.
3CServer is a TFTP/FTP server that is installed as a part of Transcend. When
3CServer starts, it checks to see if there is another TFTP/FTP server running
on your workstation, if there is, 3CServer displays a warning message and
then disables it's TFTP/FTP services.
To use 3CServer as the TFTP Server for Upgrade Manager, do the
following:
1 Permanently disable the other TFTP server running on the system.
2 Open 3CServer and select File, and then Toggle Tftp Server.
To use another TFTP server with Upgrade Manager, consult that server's
user guide and use the following default settings:
Set the TFTP HomeDirectory to <transcendhome>\Upgrade.
I
Set the Timeout to 3 Seconds.
I
Set Maximum Retries to 5.
I
G M 6.2 W
ROUP ANGER FOR
directory. Be certain that you use
INDOWS