Page 1
HUAWEI HG256 Home Gateway Quick Start 1 Introduction 1.1 The Front Panel of the HG256 The front panel of the HG256 provides the following indicators: One power indicator: POWER One WAN indicator: WAN One Internet indicator: INTERNET One WiFi indicator: WLAN...
Page 2
1.2 The Rear and Side Panel of the HG256 1. The rear panel of the HG256 provides the following interfaces and button: One WAN interface: WAN One PHONE interface: PHONE Four LAN interfaces: LAN1, LAN2, LAN3, LAN4 One Reset button: RESET One power interface: POWER 2.
Record the WLAN name and the WLAN access password. The WLAN name (SSID) and WLAN access password of the HG256 are preset before delivery. You can find them from the label on the rear panel of the HG256 or consult the Internet Service Provider (ISP).
HG256 wirelessly as follows: Step 1 Press the WPS button of the HG256 to enable the HG256 to enter the WPS negotiation state. The WLAN indicator of the HG256 blinks. The WiFi function is enabled by default and the WLAN indicator is on, so you do not need to press the WLAN button.
Page 6
RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.