Advertisement
3:Collector connector （There is a wrong mark in the
1:Channel steel
2:Collector fixing hook
drawing） 4:Wood screw
5:Angle iron piece
6:Bolt
7:Nut
Step 1: Remove the tile from the place where the plate collector shall be mounted and fixed.
Step 2: Prepare angle iron pieces 5 (L40*70*120*4); fix them onto the roof beam with wood screw 4 after drilling
its side wall;
Step 3: Weld the bent collector connector 3 onto the angle iron piece 5 (they can be weld prior to mounting them);
Step 4: Connect the drilled channel steel 1with collector connector 3 with bolt 6.
② How to connect and fix the prepared bolt
12
Advertisement
