Sanyo VCC-HD4000 - Network Camera Quick Reference Manual

Network Setup Procedure
This reference provides the required information from setting up the network to accessing the camera. For information on operating environment and wiring
connection, see the installation manual.
1
Setting up the network
information of the camera
<Default values>
1 DHCP
2 IP address
3 Subnet mask
4 Gateway
5 Network speed (bandwidth limitation) : NO LIMIT
6 Port No.
If you use the default values, you do not have to perform the
setups shown below.
1
NETWORK SET
SD/HDD SET
PASSWORD
MENU
FIRMWARE VERSION
[MENU]_(MENU END)
Select [DHCP].
DHCP
IP ADDRESS
SUBNETMASK
GATEWAY
The mark indicating that the item is selectable.
1
DHCP OFF
2
IP ADDRESS SET y
3
SUBNETMASK SET y
4 GATEWAY SET y
DHCP OFF: Uses fixed IP address.
DHCP ON: Automatically allocates IP address.
• If you set "DHCP ON", go to step 4.
2
Select [IP ADDRESS].
DHCP OFF
IP ADDRESS SET
SUBNETMASK SET
GATEWAY SET
IP ADDRESS
IP ADDRESS
192.168.000.002
x
3
SET Use the same procedure as in step
[SUBNETMASK] and [GATEWAY].
4
Select [NETWORK SPEED]
G
NETWORK SPEED
PORT
DEFAULT
[MENU]_(MAIN MENU)
G S
5
NETWORK SPEED NO LIMIT
6
PORT 00080
DEFAULT OFF
[MENU]_(MAIN MENU)
Select a network speed (bandwidth limitation).
• NO LIMIT, 128, 256, 512 (Kbps), 1, 2, 3, 4, 5, 6 (Mbps)
5
Select [PORT].
G
NETWORK SPEED
PORT
PRESET
[MENU]_(MAIN MENU)
PORT 00080
x
[MENU]_(NETWORK)
6
SET MENU MENU
Setup finished.
2
Configure appropriate TCP/IP settings in accordance with your
operating system.
: OFF
■ The following descriptions are based on the screens
: 192.168.0.2
: 255.255.255.000 displayed on the Windows XP. If your PC runs on Windows
Vista, click [Start] → [Control Panel] → [Network and Sharing
: 192.168.0.1
Center] → [Manage Network Connections], and then go to
step 3.
: 80
1
Click [Start] → [Control Panel] → [Network and
Internet Connections].
SET y
SET y
SET y
SET
SET y
2
Click [Network Connections].
OFF
SET
SET y
SET y
SET y
SET
3
Right-click on the LAN interface (Ethernet adapter)
icon used for accessing the camera and click
[Properties] in the context menu.
SET
y
y
y
Select the
entry position.
4
In the [This connection uses the following items:]
Select a value.
list box, select the [Internet Protocol Version 4
(TCP/IP)] check box, and then click [Property].
• If your PC runs on Windows Vista, select [Internet
2
to set up
S
NO LIMIT
SET
00080
OFF
5
SET
Select the [Use the following IP address:] radio
button and specify the [IP address:], [Subnet
mask:] and [Default gateway:] fields.
S
NO LIMIT
SET
00080
OFF
Select the
If the IP address for the camera is set to "192.168.0.2", enter
entry position.
"192.168.0.xxx". For "xxx", specify any value that does not
conflict with the values specified for other PCs or network
devices, or one that falls within the IP address range
Select a value.
allocated by the DHCP server.
6
Confirm the settings and click the [OK] button.
&
If you use UPnP (Universal Plug and Play) to access the
camera, refer to the "Electronic Manual" contained in the
supplied CD-ROM.
Setting up the network
information of the computer
Protocol (TCP/IPv4)] check box.
Quick Reference
3
Viewing live video
from the camera
1
Start Internet Explorer.
2
Type the IP address of the camera in the browser's
address bar, and press [Enter] key.
(Example of IP address entered)
3
Enter User Name and Password in the login
screen, and click [OK] button.
&
When you log in for the first time, type the following
User name and Password.
• User name: admin
• Password: admin
4
Click the Language button.
• Switches over to the live screen.
(From the second login onwards, the live screen appears
automatically by skipping the language selection screen.)
Control panel Live screen
You can configure various settings from the Menu screen
displayed on your PC.
For information on the menu, see the reverse side of this sheet.
For detailed information on the settings, refer to the "Electronic
Manual" contained in the supplied CD-ROM.
You can download to view the video which is recorded through
the camera.
To do so, use the supplied CD-ROM to install "HDC Utilities"
software application program on your PC.
&
Refer to page 19 of the "Instruction Manual".
GB