Canon C50FSi - VB Network Camera Setup Manual page 23

4. If the system is to be used by multiple users, you need to add users using the [User Management] tab.
• Click [Add] and set the user name and password.
• To assign administrative privileges to the user, check the [Administrator] checkbox.
Note
It is strongly recommended that before operation, you change the user name "admin" and password
created after installation.
Tip
The following operations are available by the administrator only.
• Configuring, registering, and changing camera servers
• Configuring and changing recording schedules
5. Click [Apply].
The changes are saved.
Reference
"Chapter 3 Storage Server Configuration Reference" in Administrator's Manual
VK-Lite System Installation Example
2-7