Customer Responsibilities; Product Specifications - Kenmore 33124 - Power Miser 12 Owner's Manual

Customer Responsibilities
Thank You
for purchasing a Sears water heater.
Properly installed and maintained, it should give you years of
trouble free service. If you should decide that you want the new
water heater professionally installed by Sears call the local Sears
Service Center or any Sears store. They will arrange for prompt,
quality installation by Sears authorized contractors.
• The installation must conform with the instructions in this
manual; electric company rules; and Local Codes, or in the
absence of Local Codes, with the latest edition of the
National Electrical Code. This publication is available from
your local government or public library or electric company
or by writing Underwriters Laboratories, 333 Pfingsten Road,
Northbrook, IL 60062.
Abbreviations Found In This Instruction Manual
U.L.-Underwriters Laboratories, 333 Pfingsten Rd.,
Northbrook, IL 60062
National Electrical Code-This publication is available from your
local government or public library or electric company or by
writing to U.L. above.
A.N.S.1.-American National Standards Institute
• Read the =Safety Precautions" section, page 2 of this manual
first and then the entire manual carefully. If you don't follow
the safety rules, the water heater will not operate properly.
It could cause DEATH, SERIOUS BODILY INJURY
AND/OR PROPERTY DAMAGE.
This manual contains instructions for the installation, operation,
and maintenance of this electric water heater. It also contains
warnings throughout the manual that you must read and
be aware of. Allwarnings and all instructions are essential
to the proper operation of the water heater and your safety.
Since we cannot put everything on the first few pages,
READ THIS ENTIRE MANUAL BEFORE
ATTEMPTING TO INSTALL OR OPERATE THE
WATER HEATER.
• If after reading this manual you have any questions or do not
understand any portion of the instructions, call Sears Service
Center.
• Carefully plan the place where you are going to put the water
heater. Correct electrical wiring and connections are very
important in preventing death from possible electrical shock
ann fires.
Examine the location to ensure the water heater complies with
the "Facts to Consider About the Location" section.
• For California installation this water heater must be braced,
anchored, or strapped to avoid falling or moving during an
earthquake. See instructions for correct installation
procedures. Instructions may be obtained fromyour local
dealer, wholesaler, public utilities or California office of the
State Architect, 400 P Street, Sacramento, CA 95814.
Product Specifications
MODEL
NUMBER
153.312161
153.312261
153.312362
153.312462
153.312562
TANK
CAPACITY
IN GALLONS
30
40
30
40
50
DIMENSIONS IN INCHES
DIAMETER HEIGHT
22 30
24 31_
17_ 45_
17½ 59¼
19_ 56¼
RECOVERYRATE
GALS. PER HOUR :
@90°E RISE
17.3
17.3
17.3
17.3
17.3
ELEMENT
WATTAGE
AT 24O VOLTS
3800
3800
3800
3800
3800
MINIMUM
WIRE SIZE*
(GAUGE)
12
12
12
12
12
MAXIMUM FUSE
OR CIRCUIT
BREAKER
SIZE (AMPS)
2O
20
2O
20
20
*Wiring size based on standard 60°C copper wire. If distance from fuse box to water heater is more than 90 feet, refer to your local electrical
code.