Sony SMP-NX20 Quick Setup Manual

Start
here...
Quick
Setup
Network Media Player
Guide
SMP-N200/NX20
4-412-638-11(2)
Welcome to Sony
Thank you for your purchase
of the Sony Streaming Player.
Before setup, please confirm the following.
Supplied accessories
 
AC adapter (1) AC power cord (1)
 
Remote control (Remote) Audio/video cable
(with CR2032 battery) (1) (phono plug × 3) (1)

HDMI cable (1)
(SMP-NX20 only)
Additional items required (not supplied)
 TV
 HDMI cable (for a high-definition TV)
 Broadband Internet connection
 LAN cable (for a wired connection)
 Wireless LAN router (for a wireless connection)
Follow the next five easy steps to use the player.
1
Connect to your TV
 For a high-definition TV
Using a HDMI cable is recommended.
HDMI cable (not supplied
)
(supplied with SMP-NX20)
 For a standard-definition TV
Audio/video cable
(supplied)
2
Power on
1
Connect the AC adapter and AC power cord, and then insert
the plug into the AC outlet.
After connecting, the player will automatically enter standby
in about 30 seconds.
2
Remove the insulation film from the remote.
3
Press to turn on the player.
4
Turn on the TV and set it to the input that the player is
connected to.