Udptos; Sigtimer - Cisco ATA-186 Administrator's Manual

Operating Parameters
Voice Configuration Menu Access Code
917

UDPTOS

Description
This parameter specifies the IP precedence (ToS bit) of UDP packets. Set the lower eight bits only, as
follows:
•
•
•
•
•
Value Type
Bitmap
Default
0xB8
Voice Configuration Menu Access Code
255

SigTimer

Description
This parameter controls various timeout values.
parameter.
Value Type
Bitmap
Default
0x01418564
Voice Configuration Menu Access Code
318
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
5-32
Bits 0-1: Unused
Bit 2: Reliability bit—1=request high reliability
Bit 3: Throughput bit—1=request high throughput
Bit 4: Delay bit—1=request low delay
Bits 5-7: Specify datagram precedence. Values range from 0 (normal precedence) to 7 (network
control).
Chapter 5
Table 5-5 on page 5-33 contains bit definitions of this
Parameters and Defaults
OL-3410-01