Maximum Values - Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports Programing Manual

2.1.2 Maximum Values

Programming
Number
[3XX]
[4XX]
[5XX]
[6XX]
Resource/Interface Programming PBX interface and external device settings
[7XX]
[8XX]
[9XX]
2.1.2 Maximum Values
Throughout this manual, maximum entry values are shown for each programming item. When maximum entry
values for one or more of the supported PBX models differ, these differences are listed within the programming
item, as shown in the example below.
[351]
ENTER
However, please note that extension number, slot and port entry values are not listed within each programming
item. These values vary depending on the model of PBX and the card type installed, as shown below.
Extension Numbers
All models: 1–5 digits
Feature Numbers
All models: 1–4 digits
KX-TDA50 Slot and Port Values
Available Slot Entry Values
Slot Number
01
02–04
18 PT Programming Manual
Programming Group Title
TRS/ARS Programming
CO Line Programming
COS Programming
Extension Programming
SMDR & Maintenance
Programming
Card Programming
Carrier Table No. Trunk Group No.
KX-TDA50: 01–10 KX-TDA50: 01–64
KX-TDA100: 01–10 KX-TDA100: 01–64
KX-TDA200: 01–10 KX-TDA200: 01–64
KX-TDA600: 01–48 KX-TDA600: 01–96
Description
TRS and Automatic Route Selection (ARS)
programming
CO line and trunk group settings
Class of Service parameters
Extension feature settings
Station Message Detail Recording (SMDR) and
maintenance feature settings
Used to display the cards currently installed in the
PBX, or to "delete" a card from system programming
before physically removing it.
SELECT
Disable/
ENTER
Enable
These values vary by PBX model
Supported Cards
Pre-installed Super Hybrid Ports
DLC4, HLC4, PLC4, LCOT4 cards
END
Document Version 2008-11