Vivotek FD7141 User Manual page 125

deleteallow
deletedeny
start <ip address>
end <ip address>
index <value>
return <return page>
Event/Control HTTP Tunnel Channel
Note: This request requires
Method: GET and POST
Syntax:
http://<servername>/cgi-bin/admin/ctrlevent.cgi
-------------------------------------------------------------------------
GET /cgi-bin/admin/ctrlevent.cgi
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache
-------------------------------------------------------------------------
POST /cgi-bin/admin/ ctrlevent.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled
pragma : no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT
User must use GET and POST to establish two channels for downstream and upstream. The x-sessioncookie
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Remove allowed IP address range from server. If start and end parameters
are specified, it will try to remove the matched IP address. If index is
specified, it will try to remove the address from given index position.
[start, end] parameters have higher priority then the [index] parameter.
Remove denied IP address range from server. If start and end parameters
are specified, it will try to remove the matched IP address. If index is
specified, it will try to remove the address from given index position.
[start, end] parameters have higher priority then the [index] parameter.
The starting IP address to add or to delete.
The ending IP address to add or to delete.
The start position to add or to delete.
Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.
Administrator privileges.
User's Manual - 125