Page 2
Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 10/100Mbps PCI Network Adapter Model No.: TF-3200 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:...
CONTENTS Package Contents ....................1 Chapter 1. Introduction ..................2 Overview of the product...................... 2 Features ..........................2 LED Status ......................... 2 Chapter 2. Installation Guide ................3 Hardware Installation......................3 Software Installation ......................4 2.2.1 For Windows XP......................4 2.2.2 For Windows 7 ......................
Make sure that the package contains the above items. If any of the listed items is damaged or missing, please contact your distributor. Conventions The “Adapter” mentioned in this user guide stands for TF-3200 10/100Mbps PCI Network Adapter without any explanations.
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX specifications and IEEE 802.3x Full Duplex Flow. The TF-3200 keeps low cost and eliminates usage barriers. It is the easiest way to upgrade a network from 10 to 100Mbps. Supports both 10Mbps and 100Mbps network speed both in Half-Duplex and Full-Duplex transfer modes, using Auto-Negotiation technology to detect the network speed.
TF-3200 10/100Mbps PCI Network Adapter Chapter 2. Installation Guide Hardware Installation To install the adapter, please follow these steps listed below: Turn off your computer and unplug the power cord and all cables. Remove your computer’s case cover. Locate an available PCI slot.
This section will guide you through the installation procedures for Windows XP, Windows 7, and Windows Vista. Please carefully follow the steps. 2.2.1 For Windows XP Insert the TP-LINK Resource CD into the CD-ROM drive. Right-click the icon My Computer on the desktop, and then click Manage. Figure 2-3...
Page 10
TF-3200 10/100Mbps PCI Network Adapter The Computer Management screen will appear as shown in Figure 2-4. Click Device Manager, and then you will see the various options on the right. Click Other devices, and then from the drop-down list please find Ethernet Controller. Right-click it, and then select Update Driver….
Page 11
TF-3200 10/100Mbps PCI Network Adapter Select Don’t search. I will choose the driver to install, and then click Next. Figure 2-6 Select Network adapters, and then click Next. Figure 2-7...
Page 12
TF-3200 10/100Mbps PCI Network Adapter Click Have Disk…. Note: Please do not select any network adapter which h is listed in the window. Figure 2-8 Click Browse…. Figure 2-9...
Page 13
TF-3200 10/100Mbps PCI Network Adapter Find the right product model (TF-3200)and operation system (Windows XP) in the resource CD directory and choose the .inf file, and then click Open. Figure 2-10 10. Back to the Install From Disk screen, click OK.
Page 14
TF-3200 10/100Mbps PCI Network Adapter 11. Click Next. Figure 2-12 12. The Hardware Installation screen will pop up as shown in Figure 2-13; select Continue Anyway. Figure 2-13...
Page 15
TF-3200 10/100Mbps PCI Network Adapter 13. Wait a few seconds for the installation. Figure 2-14 14. Click Finish to complete the installation. Figure 2-15...
TF-3200 10/100Mbps PCI Network Adapter 2.2.2 For Windows 7 Insert the TP-LINK Resource CD into the CD-ROM drive. Right-click the icon Computer on the desktop, and then click Manage. Figure 2-16 The Computer Management screen will appear as shown in Figure 2-17. Click Device Manager, and then you will see the various options on the right.
Page 17
TF-3200 10/100Mbps PCI Network Adapter Figure 2-18 Select Let me pick from a list of device drivers on my computer, and then click Next. Figure 2-19 Select Show All Devices, and then Click Next.
Page 18
TF-3200 10/100Mbps PCI Network Adapter Figure 2-20 Click Have Disk… in the screen as shown in Figure 2-21. Figure 2-21 Click Browse… in the Install From Disk window as shown in Figure 2-22.
Page 19
TF-3200 10/100Mbps PCI Network Adapter Figure 2-22 Find the right product model (TF-3200) and operation system (Windows 7) in the resource CD directory and choose the .inf file, and then click Open. Figure 2-23...
Page 20
TF-3200 10/100Mbps PCI Network Adapter 10. Back to the Install From Disk window as shown in Figure 2-24, click OK. Figure 2-24 11. Click Yes in the Update Driver Warning window to continue the installation. Figure 2-25 12. Click Next in the next screen as shown in Figure 2-26.
Page 21
TF-3200 10/100Mbps PCI Network Adapter 13. Select Install this driver software anyway in the Windows Security window as shown in Figure 2-27. Figure 2-27 14. Wait a few seconds for the installation. Figure 2-28...
16. Click Yes in the System Settings Change window (as shown in Figure 2-30) to restart the computer, so that the installation will take effect. Figure 2-30 2.2.3 For Windows Vista Insert the TP-LINK Resource CD into the CD-ROM drive. Right-click the icon Computer on the desktop, and then click Manage. Figure 2-31...
Page 23
TF-3200 10/100Mbps PCI Network Adapter The Computer Management screen will appear as shown in Figure 2-32. Click Device Manager, and then you will see the various options on the right. Click Other devices, and then from the drop-down list please find Ethernet Controller. Right-click it, and then select Update Driver Software….
Page 24
TF-3200 10/100Mbps PCI Network Adapter Select Let me pick from a list of device drivers on my computer, and then click Next. Figure 2-34 Select Show All Devices, and then Click Next. Figure 2-35...
Page 25
Figure 2-36 Click Browse… in the Install From Disk window as shown in Figure 2-37. Figure 2-37 Find the right product model (TF-3200)and operation system (Windows Vista) in the resource CD directory and choose the .inf file, and then click Open.
Page 26
TF-3200 10/100Mbps PCI Network Adapter Figure 2-38 10. Back to the Install From Disk window as shown in Figure 2-39, click OK. Figure 2-39...
Page 27
TF-3200 10/100Mbps PCI Network Adapter 11. Click Yes in the Update Driver Warning window to continue the installation. Figure 2-40 12. Click Next in the next screen as shown in Figure 2-41. Figure 2-41...
Page 28
TF-3200 10/100Mbps PCI Network Adapter 13. Select Install this driver software anyway in the Windows Security window as shown in Figure 2-42. Figure 2-42 14. Wait a few seconds for the installation. Figure 2-43...
Page 29
TF-3200 10/100Mbps PCI Network Adapter 15. Click Close to complete the installation. Figure 2-44 16. Click Yes in the System Settings Change window (as shown in Figure 2-45) to restart the computer, so that the installation will take effect. Figure 2-45...
TF-3200 10/100Mbps PCI Network Adapter Appendix A: Specifications Normal Interface 32-bit PCI interface Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Software Drivers for Linux, Windows 7 (32bit /64bit), Windows Vista (32bit /64bit), Windows 2000, Windows 2003, Windows XP Transmission Rate...
TF-3200 10/100Mbps PCI Network Adapter Appendix B: Troubleshooting What should I do if PC cannot find the new hardware? Check to see if the network adapter is inserted in the PCI slot properly; otherwise, please reinsert the adapter. If the problem remains, please try to change another PCI slot.
Need help?
Do you have a question about the TF-3200 and is the answer not in the manual?
Questions and answers