Access Points; Create A New Access Point; Create Access Point Groups - Nokia 002J900 User Manual

Scan for networks — If you set
●
availability to Yes, you can select how often the device
searches for available WLANs and updates the indicator.
Internet connectivity test
●
the device to test the internet capability of the selected
WLAN automatically, to ask for permission every time, or
to never perform the connectivity test. If you select
automatically or allow the test to be performed when the
device asks for it, and the connectivity test is performed
successfully, the access point is saved to the internet
destinations.
To view advanced settings, select
settings. Changing the advanced settings for the WLAN is not
recommended.

Access points

Create a new access point

Select Menu Settings
>
Destinations.
You may receive access point settings in a message from a
service provider. Some or all access points may be preset for
your device by your service provider, and you may not be able
to change, create, edit, or remove them.
When you open one of the access point groups (
), you can see the access point types:
indicates a protected access point
indicates a packet data access point
© 2009 Nokia. All rights reserved.
Show WLAN
— Select whether you want
Options Advanced
>
and Connectivity
>
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN
with the WLAN wizard.
To create a new access point, select
device asks to check for available connections. After the
Run search, connections that are already available are shown and
can be shared by a new access point. If you skip this step, you
are asked to select a connection method and to define the
settings needed.
To edit the settings of an access point, open one of the access
point groups, and select an access point. Follow the
instructions from your service provider.
Connection name
●
Data bearer
●
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
be defined
unless your service provider has instructed otherwise.
To use a data connection, your service provider must support
this feature, and if necessary, activate it for your SIM card.

Create access point groups

Select Menu
, , ,
Destinations.
Some applications allow you to use access point groups for
network connections.
To avoid selecting a single access point every time the device
makes a network connection, you can create a group that
— Enter a name for the connection.
— Select the data connection type.
or with a red *. Other fields can be left empty,
Settings and Connectivity
>
Connectivity
Access point. The
Must
>
71