Still Image Camera Settings - Nokia 002D2Q8 User Manual

•
To tag images to the Print Basket for later printing,
select Add to Print
To use the picture as wallpaper in the active standby, select
Options > Set as wallpaper.
To set the image as a call image for a contact, select
as contact call img..
To return to the viewfinder to capture a new image, press
the capture key.

Still image camera settings

There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust
'Setup settings—adjust color and lighting', p. 55. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings
Image quality—Print 5M - Large
Print 3M - Medium
Medium (1600 x 1200),
resolution), or MMS 0.3M - Small
The better the image quality, the more memory the image
consumes. If you want to print the image, select
- Large, Print 3M -
you want to send it through e-mail, select
54
Basket.
Image
and from the following:
(2592x1944 resolution),
(2048x1536 resolution), Print 2M -
E-mail 0.8M - Med. (1024x768
(640x480 resolution).
Medium, or Print 2M - Medium. If
E-mail 0.8M -
Med.. To send the image through MMS, select
- Small.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
Set
available albums opens.
Show captured
captured image after it is taken, or
continue taking pictures immediately.
Default image
captured images.
setup, see Extended digital zoom
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
Capture tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Rotate image
rotated the right way up when you open it in the gallery.
Print 5M
Restore camera
values to the camera settings.
image—Select Yes if you want to see the
No if you want to
name—Define the default name for the
(main camera only)—Select
- Select whether you want the image to be
settings—Select Yes to return the default
MMS 0.3M
On to