Configuring A Direct-Attach Scsi Partition - Spectra Logic T-Series Spectra T200 User Manual

Configure User Access
1. From the Fibre Channel Loop ID's screen, select Next. The Partition
2. Select the users who are allowed access to this partition. Only users that
3. Proceed to

Configuring a Direct-Attach SCSI Partition

When you select one of the direct-attach SCSI drives in a partition as the
controller, you create a direct-attach SCSI partition (see
Control Path on page
partition are connected to the same bus expansion module and daisy-
chained on the same SCSI bus (see
Drives on page 47
December 2008
Users screen displays.
Figure 91 The Partition Users screen (direct-attach
Fibre Channel partition).
have previously been configured (see
page 171) can be selected.
Confirm and Save Partition Settings on page
142). In this type of partition, all of drives in the
for information about daisy-chaining drives).
Note: You must have a bus expansion module installed in the same
DBA as the drives in order to use direct-attach SCSI drives. See
Direct-Attach SCSI on page 46
Creating a New Data Partition
Configuring Library Users on
Choose the Robotic
Daisy-Chaining Direct-Attach SCSI
for more information.
T200, T380, and T680 Libraries
162.
159