Remote Control - Mitsubishi Electric LDTV152 - 52IN LCDtv 1920X1080 10000:1 S-vid Comp-vid USB Owner's Manual

30
4. TV Operation and Features
Re mote Control
1. POWER: Switches TV power on and off.
2. Slide Switch: Selects the A/V device to be oper-
ated by the remote control. Set the slide switch
to TV for operation of the TV, and NetCommand-
controlled devices. Control of additional devices
requires programing (see Appendix C , " Program-
ming the Remote Control ."
3. SLEEP: Sets the TV to turn off within 2 hours in incre-
ments of 30 minutes.
4. Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers
—
and the CANCEL key to enter digital sub-channel
numbers. Use also for entering letters or names in
menus.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
key (!, &, blank space) and 0 key (/, * , -).
5. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears Fav and some
menu entries.
6. QV ( QuickView ™ ): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Not used in this model.
9. FAV (Favorites): Scans through memorized lists of
favorite channels. See Setup > Edit > Fav1–Fav6
on page 45 .
10. VOL / (Volume Up/Down): Changes sound
level.
11. CH/PAGE / (Channel or Page Up/Down):
Scans up or down through memorized channels.
Pages up and down through screens when used with
ChannelView or the TV Guide Daily system.
12. FORMAT: Changes the shape and size of the TV
picture.
13. LIST: Works like the LIST key for a cable box or satellite
receiver when "learned" for Net Command or when
the remote has been programmed for the device.
14. INPUT: Displays the Input Selection menu from
which you can select an input source to view, such
as an antenna input (ANT 1/2) or a connected
device.
15. ( Adjust Up/Down/Left/Right): Navigate
menus and change settings.
16. ENTER: Selects a channel number or menu item.
17. GUIDE: Displays or removes ChannelView™ channel
listings or, if enabled, TV Guide Daily listings for
ANT 1 and ANT 2. Displays DVD disc or top menu
for a NetCommand-controlled DVD player. Dis-
2
3
4
5
7
8
10
11
17
18
24 25 26
27 28 29
23
plays the guide for a NetCommand-controlled cable
box or satellite receiver.
18. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip ratings information. See
"Status Display" on page 32 for details.
19. AUDIO: Selects individual audio settings to adjust.
20. VIDEO: Selects individual video settings to adjust.
21. MENU: Displays the main TV menu. When a sub-
menu is open, backs up one menu level.
22. EXIT: Closes TV on-screen menus/displays.
23. F1–F4
For devices under Net Command control:
Perform Net Command "Learning" to assign your
choice of functions to the F1–F4 keys.
For devices operating independently of
1
6
9
12
13
14
15
16
19
20
21
22