Table of Contents
Advertisement
14. LIQUID CRYSTAL
DISPLAY
The LCD (14) can show the current state of the unit
15 & 16. SELECT
STATIONS
Press and release a TUNE/SKIPd
- button (15) or TUNE/SKIP
+ /B button (16)
immediately
to move radio frequency
number
down or up on step
Press and hold a TUNE/SKIPd
- button (15) or TUNE/SKIP
+ /D> button (16)
for several seconds
to seek the next clear station
15 & 16. SKIP TRACKS
Press a TUNE/SKIPd
- button (15) or TUNE/SKIP
+ /W button (16) to move to
the previous
track or the following
track
Track number
shows on the display
15 & 16. FAST FORWARD
AND FAST REVERSE
17.
16.
19.
20.
21.
22.
23.
Press a TUNE/SKIP<=I/
- button (15) or TUNE/SKIP
+ /p.> button (16) to fast
reverse or fast forward
CD play starts from when you release the button
PRESET
STATIONS
Six number
buttons
(17) store and recall stations
for each band
Store a station
Select a band (12) (if needed)
Select a station
Hold a preset button for several
seconds
Recall a station
Select a band (12) (if needed)
Press a preset button to select stored station
TOP:
PLAY THE FIRST TRACK
Press TOP button (18) to play the first track of the current disc
REPEAT THE SAME TRACK
Press RPT button (19) to continuously
repeat the same track
Press again to stop
repeat
INTRO:
PREVIEW
ALL TRACKS
Press SCN button
(20) to play first several seconds
of each track on the current
disc
Press again to stop intro and listen to track
RANDOM:
PLAY ALL TRACKS
Press RND button (21) to play all tracks on CD in random
Press again to cancel
the function
AUTOMATICALLY
STORING
& PROGRAM
SCANNING
Automatically
Storing
Press and hold AS/PS
button (22) for several seconds
to toggle automatically
storing function
It starts searching
next frequency
and stores the clear station
into the preset memory
At the end of automatically
storing operation,
mode is
changed
to Preset Scan
Preset
Scanning
Press ASIPS
button (22) shortly to toggle
preset scanning
function
During the
scanning,
it will stop at every stored station for several seconds
and the number
of the channel
being scanned
flashes on the display
Press it again to stop
scanning
RESET BUTTON
FUNCTION
RESET button (23) is placed
on the housing
and must be activated
with either a
ball point pen or thin metal object
The reset button
is to be activated
for the
following
reasons
l
Initial installation
of the unit when all wiring is completed
l
All the function
buttons
do not operate
l
Error symbol on the display
Note:
If RESET button (23) is pressed and the unit doesn't
work yet, please use
a cotton swab soaked
in isopropyl
alcohol
to clean the socket on the back of the
front panel
10
Advertisement
Table of Contents
