Page 1
ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place Torrance, California 90501 U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave. Suite 203, Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) KTX-C10lP is suitable for the rearview camera, HCE-C105 and HCE-C1070.
Remove the camera mounting bracket from the license plate Contents frame. It is not necessary to disassemble the camera bracket. Attach the camera to the camera mounting bracket. (Fig. 2) Route the camera cable through the mounting bracket, and align the mounting holes in the camera with the bracket. Secure the camera to the bracket with the 2 hex screws.
Page 3
File the marked area on the license plate frame, and route the Bracket Installation Special Instruction light wire to the top hole. (Fig. 7) In pickup truck' installations, the white electrical connector between the back-up camera and the extension cable may be Install the license plate frame using the appropriate 4 screws.
Page 4
WHEN USING A DRILL TO MAKE A HOLE, TAKE PRECAUTIONS WARNING SUCH AS WEARING GOGGLES SO FRAGMENTS DO NOT GET INTO This symbol means important instructions. Failure THE EYES. to heed them can result in serious injury or death. Failure to do so may result in injury. CAUTION KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE REACH OF CHILDREN.
To.prevent lost packages it is recommended to use a it thoroughly. Should you have any questions, please contact your carrier that provides a tracking service. Dealer or contact Alpine at one of the telephone numbers listed below. .HOW WE LIMIT IMPLIED WARRANTIES: .PRODUCTS COVERED:...
Need help?
Do you have a question about the KTX-C10LP and is the answer not in the manual?
Questions and answers