Table of Contents
Advertisement
Figure 3-21. Broadcast Enable Dialog Box
Click OK to enable the broadcast. Click X or press
5
Commands dialog box.
If broadcasting is enabled, type the information and/or perform the mouse movements you
6
want to broadcast from the user station. Only servers in the list are accessible.
NOTE:
The other user (16-port switch only) is disabled when broadcast mode is enabled.
To turn broadcasting off:
From the Commands dialog box, disable the Broadcast Enable check box.
Changing Your Switch Mode (16-port Console Switch Only)
Your Console Switch allows you to connect to attached servers using two methods: Preemptive and
Cooperative.
Select Preemptive (default setting) to allow any user to select any server at any time; a request from
another user disconnects the current user without warning.
-or-
Select Cooperative to maintain the current user connection; the current user won't be
disconnected if another user requests connection.
To access the Switch dialog box:
Press <Print Screen>. The Main dialog box appears.
1
Click Setup - Switch. The Switch dialog box appears.
2
44
Basic Operation
to cancel and return to the
Escape
Advertisement
Table of Contents
