Advertisement
Quick Links
Instructions for Model TB80 - TB100 - TB130 Top Bender
Automatic Mode - multiple bend program
WARNING!
Thoroughly read operators manual before attempting to operate machine
(Machine must be connected to correct power source before switching power on! DO NOT USE extension cord.)
Create a new program with multiple bends programmed.
1. Press programming icon from Home Screen
2. Enter program name from alpha keyboard, press OK.
Program
name
area
3. Press right arrow to access Data Input Area.
Select desired bending steps 1-30:
4. Enter desired bend angle, springback and speed setting
to complete each line and select OK to enter.
5. Bending info entered for one bend:
6. Press left arrow to return to programming page.
Press File Save icon to save changes.
7. Press check mark to activate selected program:
8. Press Automatic icon:
9. Operation screen will appear:
CML USA, Inc. • (563) 391-7700
®
(Continued on back.)
Setting Springback Value
Advertisement
Related Manuals for Ercolina Top Bender TB80
Summary of Contents for Ercolina Top Bender TB80
- Page 1 Instructions for Model TB80 - TB100 - TB130 Top Bender ® Automatic Mode - multiple bend program WARNING! Thoroughly read operators manual before attempting to operate machine (Machine must be connected to correct power source before switching power on! DO NOT USE extension cord.) Create a new program with multiple bends programmed.
- Page 2 190° Note: entering a value between 0% and 10% in the Speed field, the machine will always move at a minimum speed of 10% while displaying the entered value. CML USA, Inc. • (563) 391-7700 Programming a Bend Angle www.ercolina-usa.com...
Need help?
Do you have a question about the Top Bender TB80 and is the answer not in the manual?
Questions and answers