Table of Contents
Advertisement
∫ Connection and recognition
procedures
≥ Connect this unit to the AC adaptor.
1
Connect this unit to the PC.
AUSB cable
(supplied with the Camcorder)
≥ This unit is recognized as
a [DVD-RAM Drive] on
[My Computer].
≥ Insert the plugs as far as they will go.
The unit and PC will not operate
properly if they are not inserted fully.
≥ Be sure to use the USB cable supplied
with the Camcorder. (We cannot
guarantee operation if you use a USB
cable other than the one supplied with
the Panasonic Camcorder.)
2
Start copying/playback.
≥ Use the software supplied with a
Panasonic Camcorder to copy/play
back the motion video/pictures.
≥ Read the operating instructions of
the software for information about
how to copy/play back.
12
LSQT1571 (ENG)
∫ To disconnect the USB cable
If the USB cable is disconnected while the
access lamp is lit, this unit may malfunction
and the data may be lost.
1
2
A
3
4
safely
Check that the access lamp is not lit.
Double click the
task tray.
≥ Hardware disconnect dialogue
appears.
≥ Depending on your PC's settings,
this icon may not be displayed.
Select [USB Mass Storage Device]
and click [Stop].
Click [OK].
≥ Click [OK], and you can safely
disconnect the cable.
(
) icon in
Advertisement
Table of Contents
