Panasonic DMP-BDT320 Owner's Manual page 37

H or F
(" " stands for a number.)
There is something unusual.
Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1 Disconnect the plug from the AC outlet, wait a
few seconds, then reconnect it.
2 Press [Í/I] to turn the power on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
START
The system is being restarted during the
firmware update. Please do not turn off the
unit.
UPD /
(" " stands for a number.)
The firmware is being updated.
Please do not turn off the unit.
FINISH
The firmware update is complete.
VQT3V22 37