LF Kobalt SGY-AIR295 Manual page 6

OPERATING INSTRUCTIONS
4. Promptly remove gauge from valve stem.
(See Figure 6)
5. Push the gauge nozzle (A) onto tire valve until new
pressure reading locks on the display (C).
(See Figure 7)
6. Repeat the above steps 2, 3, and 4 until required
tire pressure is obtained.
NOTE
Do NOT press the pressure release button (D)
for too long. It will result in over-releasing of tire
pressure.
CARE AND MAINTENANCE
Always operate the product with care by following the operation
instructions.
Keep the product clean after each use.
Keep the product in a dry and safe place out of reach of children
when it is not in use.
CHANGING THE BATTERIES
1. Open the battery cover (E). (See Figure 1)
2. Carefully take out the two batteries (b) and
replace with new 1.5 VDC AAA batteries.
Make sure the new batteries are inserted with
the positive and negative anodes facing the
proper direction. (See Figure 2)
6
6
A
7
A
1
2
b