Related Manuals for UGREEN NASync DXP2800
Summary of Contents for UGREEN NASync DXP2800
- Page 2 Contents About the DXP2800 Instructions Before Use Package Contents Product Overview Installing 3.5-inch Hard Drives Installing 2.5-inch Hard Drives Installing M.2 SSDs (Optional) 9-11 Powering On Indicator & Buzzer Description Web Client—Binding & Settings Phones/Tablets & Other Devices—Binding & Settings Device Sharing Reset Network &...
- Page 3 About the DXP2800 Package Contents UGREEN DXP2800 is a network-attached storage device designed for home and personal users. The DXP2800 works as an intelligent data management center where users can store and access data via smartphones, laptops, tablets, and TVs anywhere there is network access.
- Page 4 Product Overview Magnetic Dust Mesh Filter HDMI Port USB 3.2 Gen 1 Port 2×USB 2.0 Port Power Port 1×2.5GbE Ethernet Port Reset Hole 1×Memory Slot (with one memory Safety Lock module pre-installed) 2×M.2 Slot (optional) Panel Power Button (Loosen the screws to remove it ) Power Indicator...
- Page 5 3. Install the drive: Place drive on the tray. Ensure the four fastening pins on the tray (two on each side) Unlocking Hard Drive Tray are aligned with the screw holes on the drive. Use the key to unlock the hard drive tray, press the buckle to pop the handle out, then pull the tray out. Hard drive pins face down Align fastening pins with screw holes...
- Page 6 Installing 2.5-inch Hard Drives (Screwdriver Required) 4. Load the tray into the bay: Insert the loaded drive tray into the empty drive bay and lock it. 1. Remove the fastening pin: Use the drive tray key to move the rear end fastening pin into the fixed hole near the tray.
- Page 7 Installing M.2 SSDs (Optional) Requires Sticking Silicone Pad for Thermal Conduction 2. Insert M.2 SSD into the slot in the direction shown by the image below. What does installing an M.2 SSD do? M.2 SSDs can be used as a normal storage drive or as a read/write cache to improve reading and writing performance of random data.
- Page 8 Powering On 4. Reinstall the tray and power on the NAS. After successful boot up, go to the "UGREEN NAS" app to Use Ethernet cable to connect NAS to a LAN port on a router. Connect the power adapter to the device, set the SSD cache.
- Page 9 White Pulsing Drive hibernation manage the device. · Register and bind UGREEN Cloud account (optional): If you want to use additional functions, Static Internet not connected Orange such as UGREENlink remote access or device notifications, you can register a UGREEN...
- Page 10 "Add" to create a new user account, and provides the account and password to the invited user; Option 2: Go to UGREEN NAS official website (https://nas.ugreen.com/download), download the invited user logs in to the "UGREEN NAS", searches for the device via the L AN, then enter the and install the corresponding application.
- Page 11 If repair or replacement parts and/or cause severe internal burns or other hazards. Call a local poison control center for treatment accessories are required, please contact UGREEN customer service. information. 4. This product contains a non-replaceable battery of the type CR2032 (3.0 Vdc).
- Page 12 • have a pain in their abdomen, chest or throat; File System • be tired or lethargic; Internal non-"UGREEN NAS" storage pool: • be quieter or more clingy than usual or otherwise "not themselves"; Btrfs/ext2/ext3/ext4/VFAT/exFAT/FAT16/FAT32/NTFS/XFS • lose their appetite or have a reduced appetite; and...
Need help?
Do you have a question about the NASync DXP2800 and is the answer not in the manual?
Questions and answers