Cooktop Removal; If You Need Assistance - Whirlpool SC8720EDB - GAS DOWNDRAFT Installation Instructions Manual

Cooktop removal

If removing the cooktop is necessary for
cleaning or maintenance:
1. Shut off gas supply.
2. Disconnect gas and electrical supplies.
3. Disconnect vent system from unit inside
cabinet.
4. Lift cooktop out of countertop to complete
cleaning or maintenance.
Part No. 8101P350-60/8284676
© 2000 Whirlpool Corporation
After cleaning and maintenance:
1. Reinstall cooktop in cutout.
2. Check that front edge of cooktop is parallel
to front edge of countertop.
3. Connect gas and electrical supplies.
4. Connect vent system.
Benton Harbor, Michigan 49022
If cooktop does not
operate:
Check that circuit breaker is not tripped or
the house fuse blown.
Check that the power supply cord is
plugged into the wall receptacle.
Check that the gas supply valves are
turned to the "ON" position.
See Use and Care Guide for
troubleshooting list.

If you need assistance:

Check your Use and Care Guide for a toll-free
number to call, or call the dealer from whom
you purchased this appliance. The dealer is
listed in the Yellow Pages of your phone
directory under "Appliances — Household —
Major — Service and Repair."
When you call, you will need the cooktop
model number and serial number. Both
numbers can be found on the model/serial
rating plate located on the bottom of the
burner box.
Printed in U.S.A.