Redmi Pad Pro Quick Start Manual page 5

• You can also use any third-party charger that complies with USB2.0
or higher protocol standards and also meets the requirements of the
International Information Technology Equipment Safety Standard (IEC
60950), Audio/video, Information and Communication Technology
Equipment Standard (IEC 62368-1) and the related laws and regulations of
your country or region.
• Please note that the product allows the use of chargers with the maximum
output of 33W. The maximum voltage shall not exceed [11 V] and the
maximum current shall not exceed [3A].
Using other chargers that do not meet the above requirements to charge
this product may damage the product itself and your personal or property
safety.
Security Statement
Please update your tablet's operating system using the built-in so ware
update feature, or visit any of our authorized service outlets. Updating
so ware through other means may damage the device or result in data loss,
security issues, and other risks.
The power delivered by the charger shall be between min [10]
Wa s required by the radio equipment, and max [33] Wa s in
10 - 33
order to achieve the maximum charging speed. USB PD fast
W
Charging.
USB PD
EU Regulations
RED Declaration of Conformity
Xiaomi Communications Co., Ltd. hereby declares that this Tablet with
Bluetooth and Wi-Fi 2405CRPFDG is in compliance with the essential
requirements and other relevant provisions of the RE Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: www.mi.com/en/certification
RF Exposure Information (SAR)
This device is in compliance with Specific Absorption Rate (SAR) limits for
general population/uncontrolled exposure (Localized 10-gram SAR for trunk,
limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP
Guidelines, and RED (Directive 2014/53/EU).
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands.
When a aching the device near the body, a belt clip or holster should be used
which does not contain metallic components. RF exposure compliance was
not tested or certified with any accessory containing metal worn on the body,
and use of such an accessory should be avoided.