BMW INSTRUMENT CLUSTER SIA RESET E38 E39 E46 E53 E54 Manual

INSTRUMENT CLUSTER SIA RESET
Model: E38,E39,E46,E52,E53
Production Date: E46 from 9/99
On 2001 vehicles without the diagnostic connector in the engine compartment, the use of
the SIA reset tool is not possible. The service indicator may be reset using the reset mode
in the instrument cluster.
1
PRESS AND HOLD
LEFT BUTTON.
KEEP PRESSED FOR
5 SECONDS AFTER
KEY IS SWITCHED
ON.
TAP BUTTON TO
RESET DISPLAY.
Reset procedure for high and low clusters with SIA III using the Reset Mode:
• Ignition key must be "off"
• Press and hold the trip odometer reset button in the instrument cluster (left button), and
turn the ignition key to the first position.
• Keep the button pressed for approximately 5 seconds until one of the following words
appear in the display: "OIL SERVICE, or "INSPECTION", with "RESET".
The service due is shown with "reset" if the coded minimum consumption limit has been
reached and resetting is possible. If "reset" is not shown, the minimum limit has not been
reached and resetting is not possible.
• Press and hold the reset button again until the word "RESET" begins to flash.
E38,E39,E53 from 9/00
80
100
60
40 120
½
20
140
miles
Service interval reset: high cluster
4
3
5
2
6
1
0
7
40 0
20
15 10
TURN THE KEY TO
!
P
+ ABS
POSITION 1 (KL R)
2