Audio Design Pro JTX-PMU Owner's Manual

IMPORTANT:
The product has many adjustment possibilities and to
use it correctly it is ABSOLUTELY necessary to carefully
read the instructions.
1) Power switch (short press) and off switch (long press). Once turned on, a
short press, in sequence, activates the functions of changing frequency,
SET
transmission power or input type.
2) If pressed for a long time, activates the "lock" or "unlock" function
respectively visible on the screen with the text LC-ON or LC-OFF. If the
functions of changing frequency, transmission power or input type are active
(flashing), changes the value that flashes. If no other functions are active, a
short press allows you to reduce the audio volume in transmission.
3) If the functions of changing frequency, transmission power or input type
are active, changes the value that flashes. If no other functions are active, a
short press activates the MUTE function. After pressing button 2 and
activating the audio volume control, increase the audio volume
4) Working frequency
5) Selected input: Line, Mic 0V (dynamic microphone), Mic 5V (low voltage
condenser microphone), Mic 48V (48V condenser microphone)
6) Transmission power: High / Low
7) Battery status
8) Audio signal volume
9) USB C connection to charge the battery
12) Area with IR sensor. To use to got the working frequency from receiver.
The pairing between receiver and transmitter can therefore be automatic
with the activation of the transmission of information via IR from the receiver
or manual, by adjusting the transmitter and receiver to the same frequency.
As for all other transmitters, keep in mind that there must not be more than
one receiver tuned to the same frequency and that the use of the auto scan
on the receiver avoids using frequencies that are not "clean".
Notes for the battery:
When you charge the battery, the three dashes inside the battery symbol light up in sequence.
When the battery is charged, the three dashes remain lit steadily.
During use, as the battery runs out, the three dashes become 2 then 1 until only the empty battery
symbol remains flashing and immediately after the TX turns off.
Remind to charge before and after each performance.
10 11
12
If non used, recharge at least every 2 months.
Web Canale youtube
JTX-PMU
Sistema trasmissione wireless UHF
6
7
12
3
2
1
Audiodesign Srl
Via dell'industria, 28 - 42025 CAVRIAGO (RE)
info@audiodesign.it
+39 0522 941444 -
www.audiodesign.it
Facebook
Trasmettitore Wireless a 200 canali con connessione XLR
Adatto a tutti i ricevitore della serrie PMU 3-4-8.. e PMU D...
200 Ch Wireless System with XLR connection
Suitable for all PMU 3-4-8.. and PMU D... series
5
4
8
9
Nel sito www.audiodesign.it
Please refer to www.audiodesign.it
MANUALE D'USO
Owner Manual
Live Wireless
JTX-PMU
potrete trovare una eventuale versione aggiornata del presente manuale.
to download an eventual updated version of this manual.