Renkforce TP806L Operating Instructions Manual page 17

12. Basic operation
12.1. Powering on and off
1. To power on, move the power switch to position 1.
The indicator Power lights up.
>
The buzzer emits a short buzz.
>
2. To power off, move the power switch to position 0.
NOTICE: Do not unplug the power cable if the printer is powered on to prevent product damage.
Move the power switch to position 0 before unplugging.
13. Printing
13.1. Feeding paper out
Prerequisites:
The cover is closed.
>
◼
Press the button Feed to feed out a small amount of paper.
◼
Press and hold the button Feed to continously feed out paper. Release the button to stop.
13.2. Printing a self-test page
The self-test checks and prints current printer settings.
1. (If not installed) Install the Windows® Label Printer Utility. Refer to
Windows® Label Printer Utility"
2. Open the Windows® Label Printer Utility.
3. Select the printer for which you want to print a self-test page.
4. Click the button Printer Test ... to print a self-test page.
for instructions.
17
"Configuring printer with