General Problems; The Computer Stops Responding; A Program Stops Responding - Dell Dimension T2310 Owner's Manual

ON SYSTEM DISK ERROR
N -
computer.
OT ENOUGH MEMORY OR RESOURCES
N
open. Close all windows and open the program that you want to use. In some cases, you might have to
restart your computer to restore computer resources. If so, run the program that you want to use first.
PERATING SYSTEM NOT FOUND
O
HE FILE BEING COPIED IS TOO LARGE FOR THE DESTINATION DRIVE
T
large to fit on the disk. Try copying the file to a blank disk or using a larger-capacity disk.
x:\
IS NOT ACCESSIBLE
into the drive and try again.

General Problems

The computer stops responding

URN THE COMPUTER OFF
T
key on your keyboard or moving your mouse, press and hold the power button for at least 8 to
10 seconds until the computer turns off. Then press the power button again to turn on the computer.
You might lose data if you are unable to perform an operating system shutdown.

A program stops responding

ND THE PROGRAM
E
Press <Ctrl><Shift><Esc> simultaneously.
1
Click Applications.
2
Click the program that is no longer responding.
3
Click End Task.
4
36
Solving Problems
— A floppy disk is in the floppy drive. Remove the floppy disk and restart the
LOSE SOME PROGRAMS AND TRY AGAIN
. C
— Contact Dell (see page 112).
HE DEVICE IS NOT READY
. T
— If your computer locks up and you are unable to get a response by pressing a
—
— The file that you are trying to copy is too
— The floppy drive cannot read the disk. Insert a floppy disk
— You have too many programs