Scheppach RRMA300 Operating And Safety Instructions Manual page 30

• Keep the original product description safety for fu-
ture reference.
• Dispose of the product properly.
• Keep the battery charger clean. Dirt results in a
risk of electric shock.
• Check the battery charger, cable and plug before
every use. Do not use the battery charger if you
detect any damage. Never open the battery charg-
er yourself and only have it repaired by qualified
specialists and only with original spare parts. A
damaged battery charger, cable and plug increases
the risk of an electric shock.
• Always check that the mains voltage concurs with
the voltage specified on the type plate of the bat-
tery charger.
• Never use the battery charger if the cable, plug
or the product itself are damaged due to external
influences. Take the battery charger to the nearest
specialist workshop.
• Never open the battery charger. Take the battery
charger to the nearest specialist workshop.
m ATTENTION!
This power tool generates an electromagnetic field
during operation. This field can impair active or pas-
sive medical implants under certain circumstances.
In order to prevent the risk of serious or deadly in-
juries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
machine.
Residual risks
The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Before performing setting or maintenance work, re-
lease the start button and pull out the mains plug.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this operating manual. This is how to ensure that
your machine provides optimum performance.
• Keep your hands away from the working area when
the machine is in operation.
6. Technical data
Robotic lawnmower
Voltage
Idle speed n
Cutting width
Cut height
Cutting height positions
Max. surface
Max. incline
Tightest possible passage
AK2.0-RC-20Li battery
Type
Voltage
Capacity
Power
Charge time
NT0.6-RC-20Li power supply
Voltage (input)
Frequency
Power consumption
Voltage (output)
Charge current
IP protection classes
Robotic lawnmower
Charge station
Power supply
Total weight (net)
Subject to technical changes!
m IMPORTANT:
This battery charger is suitable exclusively for charg-
ing the product type BRMR300.
Noise & vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection.
Device emissions values
Measured sound power level L
Device emissions values uncertainty K
Guaranteed sound power level L
Sound pressure noise level at the
operator's ear L
www.scheppach.com
0
18V (max 20 V
approx. 3 h
100-240 V~
approx. 5.5 kg
WA
WA
WA
PA
20 V
3000 rpm
16 cm
20-50 mm
7
300 m²
25 %
0.8 m
Li-ion
)
2000 mAh
36 Wh
50-60 Hz
15 W
20 V
0.6 A
IPX5
IPX4
IP67
58 dB
0.89 dB
61 dB
38.5 dB
GB | 23