IBO S-150 User Manual page 17

Safety of use | rules relating to security
• When installing the S-150 machine, pay attention to whether the place where it will
be installed is strong enough to support its weight. It may fall and cause property
damage or injury.
• Install the S-150 machine so that any leakage in the installation does not result in
flooding the device with water. The inverter must be protected against water, inc-
luding atmospheric water. The inverter must not be installed in rooms exposed to
high air humidity. There is a risk of property damage
• Install the S-150 machine away from direct sunlight. UV radiation increases the risk
of property damage
• The S-150 machine should be installed and stored at room temperature, in a dry,
cool and well-ventilated place.
• At high temperatures or in summer, good ventilation is necessary to avoid conden-
sation and dew. There is a risk of property damage.
CAUTION
The device must not be influenced by an external, strong magnetic field. Any magnets
should be at least 25 cm away from the device.
The device cannot work with hydrophore tanks.
External conditions have a direct impact on the operation and reliability of the device. The-
refore, the following conditions must be met:
• Permissible ambient temperature range: 0°C to +40°C
• Indoor use only
• Install away from corrosive substances and explosive gases
• Install away from flammable materials
• Install in dry and well-ventilated places
• Install in places outside the range of electromagnetic interference
• Avoid places that are dusty or exposed to metal filings that may get into the con-
troller.
Environmental requirements
17
Installation