Preventive Maintenance - NEC VERSA MINIDOCK 6000 Service Manual

Section 3
Troubleshooting and Repairs
This section contains preventive and corrective maintenance procedures for the NEC Versa
MiniDock 6000. The first part of the section describes cleaning procedures and preferred
handling procedures for sensitive components.
The second part of the section contains removal and replacement procedures for all field
replaceable parts. The remainder of the section includes an Illustrated Parts Breakdown
(IPB), that identifies parts and corresponding part numbers for ordering purposes.

PREVENTIVE MAINTENANCE

Follow these precautions when using and storing the MiniDock 6000.
T
Do not use or store the MiniDock in direct sunlight or near radiant heat sources
for an excessive length of time.
T
Do not use or store the MiniDock in dusty environments.
T
Do not use or store the MiniDock near chemicals.
T
Do not cover the air vents or put anything near enough to them to block air cir-
culation.
T
Avoid excessive vibration or shock.
T
Keep the MiniDock away from machinery that generates strong electric or mag-
netic fields.
T
Do not place heavy objects on the MiniDock. Make sure the CRT base is in posi-
tion before placing an external monitor on it. The base is designed to support an
external monitor only. Do not place other heavy objects on the CRT base.
Cleaning the MiniDock's Exterior
Use the steps below to clean the outer surface of the unit.
1. Power off the MiniDock. Unplug all cables connected to the system.
2. Wipe the outside of the unit, with a soft, clean cloth. Remove stains with a mild,
liquid detergent like a common household cleaner.
Cleaning the MiniDock's Interior
When servicing the inside of the unit, remove dust and other foreign particles from inside
as follows.