Changing Irq And Dma Settings - NEC VERSA MEDIADOCK 2000 User Manual

To change a volume setting, type the following:
3.
T
The command
T
The code for the setting to change followed by a
colon
T
A number between 0 and 15 as the new setting.
The following example decreases the master volume to 3
and increases the wave volume to 14:
When you finish using your DOS-based application, you do
not need to reset the volume settings for Windows. At boot
up, Windows specifies its own settings.

Changing IRQ and DMA Settings

Before changing these settings, check the documentation
that came with your MS-DOS based application. If the ap-
plication has its own setup, try adjusting the application
settings before changing MediaDock 2000 settings.
followed by the space.
essvol
changes the master volume
/v:
changes the line volume
/l:
changes the wave volume
/w:
/m: changes the mic volume
changed the CD volume
/c:
/s: changes the synthesizer volume.
ESSVOL /V:3 /W:14
Setting Up and Using the Software 3-9