Table of Contents
Advertisement
4-8
Troubleshooting and Repair
DISASSEMBLY AND REASSEMBLY
This subsection contains step-by-step disassembly procedures for the system. Reassembly is
the reverse of disassembly. Each procedure is supported by a simplified disassembly illus-
tration to facilitate removal. The detailed exploded-view diagram and parts lists for the sys-
tem unit are shown later in this subsection.
Required tools include a Phillips-head screwdriver. For complete disassembly of the system
unit, follow the disassembly order listed in Table Section 4-3. To reassemble, follow the ta-
ble in reverse order.
Table Section 4-3 MediaDock Disassembly Sequence
Sequence
1
2
3
4
5
6
7
8
When disassembling the system unit, follow these general rules.
n
Turn off and disconnect all power and all options, including the AC adapter (if
connected) and primary battery pack (see the procedures that follow).
n
Do not disassemble the system into parts that are smaller than those specified in
the procedure.
n
Label all removed connectors. Note where the connector goes and in what posi-
tion it was installed.
Part
Top Cover Assembly (includes plungers (2), docking cable) 4-9
Sound Board (G8SEA)
Power Amplifier Board
Assembly Handle
Left Side Latch, Right Side Latch
CD-ROM Reader
High-Range Speakers
Mid-Range Speakers
See Page
4-12
4-14
4-16
4-16
4-18
4-20
4-23
Advertisement
Table of Contents
Troubleshooting
