2-4
Setup and Operation
Table Section 2-2 Control and Switch Functions
Control
Microphone
Suspend/Resume
Button
Power Switch
LCD Sensor
Kensington Lock
Volume Control
Contrast Control
Brightness Control
Status Bar
The NEC Versa 4000 status bar is located in the upper left corner of the keyboard panel.
Figure Figure Section 2-4 shows the status bar.
Function
Allows the user to record monophonic sound directly into the NEC
Versa 4000 system.
Press the button for Suspend mode, press again to resume active
mode.
Turns the system on when pushed to the right. Turns the system off
when pushed to the right again..
Senses when the LCD panel is closed, and turns off the panel.
Enables the user to add an optional Kensington Lock.
Controls the speaker volume.
Adjust the dark/light background on the LCD using this switch (on
DSTN models only).
Move the control upward to increase brightness on the LCD. Lower the
control to decrease brightness on the LCD. A brighter adjustment uses
more battery power. For longer battery life, decrease the brightness.
Status
Bar
Figure Section 2-4 Status Bar Location