Table of Contents
Advertisement
Page 2
Mouse Buttons
Use the Left and Right buttons to set the mouse button mode to "Right-
handed" or "Left-handed".
Speed
Set the mouse speed to High, Medium or Low.
Auto Start
When this is selected, the projector turns on automatically when the power cord
is plugged into an outlet.
Power Management
When this is selected, the standby mode is set automatically if no signal is input
for 5 minutes.
Power Off Confirmation
When this is selected, a verification message is displayed when turning the
power off.
Keystone Save
When this is selected, the setting for compensating for trapezoidal distortion is
stored and remains in the memory even when the power is turned off.
White Segment
(LT series only)
If you prefer putting emphasis on brightness, place a checkmark in the box to
turn the option. If you prefer an image in truer color, turn off this option.
Highlight "OK". Press the ENTER button to validate the above settings.
previous page
next page
Advertisement
Table of Contents
