Antenna - NEC PX-TUAN-01 Manual

2.2.3 Audio/Video
For audio connection, use the Audio L+R connectors (RCA, white+red).
Connect the "Audio OUT" to the "Audio INPUT" of the NEC Plasma Display.
Make sure that the used Audio INPUT is linked with the used Video INPUT (double check in
NEC "AUDIO" settings menu)
For video connection use the YCbCr (RCA, green+blue+red) cable.
Connect the YCbCr OUTPUT of the tuner box with the YCbCr (DVI/HD) INPUT of the
NEC Plasma Display (please double check that switch of the tuner box is in YCbCr mode).
If for whatever reason you can't use the YCbCr INPUT of your NEC Plasma Display, you may
use the processed S-Video or Composite connection.
The MONITOR Video Output of the tuner will only display the actual received TV channel.
This output has no OSD (On Screen Dislay) information and no Teletext.

2.2.4 Antenna

It's important to use high quality coaxial cable and connectors (with a high screening of more
than 60dB as supplied in the package).
A lower quality coaxial cable and connectors can cause serious picture quality
problems due to interference and/or reflections!
-9-
PX-TUAN-01 Instruction Manual