JoinTech JT701D User Manual

Hide thumbs

page of 39

/ 39
Bookmarks

Quick Links

Download this manual

JT701D User Manual

V1.2

Shenzhen Joint Technology Co.,Ltd

03/22/2021

1 / 39

Need help?

Do you have a question about the JT701D and is the answer not in the manual?

Questions and answers

Summary of Contents for JoinTech JT701D

Page 1 JT701D User Manual V1.2 Shenzhen Joint Technology Co.,Ltd 03/22/2021 1 / 39...
Page 2 Wake Up Source ...................................... 18 Preparation before configuration ..............................19 Micro-USB configure cable and connect to computer via USB port ................19 Open JT701D Assistant tool ............................... 19 Check the communication connection ........................... 20 Basic Configuration ....................................20 Query firmware version, device ID and battery power ..................... 20 Terminal timing ....................................
Page 3 JT126 Technical parameters ............................... 30 JT126 Power on and power off ..............................31 Bind JT126 temperature and humidity sensor with JT701D .................... 31 Unbind JT126 temperature and humidity sensor from JT701D ..................31 Product Peripherals -JT709 Bluetooth slave lock......................... 32 JT709 Introduction..................................
Page 4 Copyright ©Shenzhen Joint Technology Co.,Ltd. User can read and photocopy this document, but without the permission of Jointech, please do not modify this document or quote design pictures of products in this document. All the contents in this document are currently accurate. However, due to the continuous iteration and update of products, we may update the manual from time to time.
Page 5 SMS, RFID authorization card, serial port, Bluetooth, cellular network and other channels. In terms of peripheral expansion, JT701D can support 10 JT126 wireless temperature and humidity sensors to work at the same time, or 10 JT709 Bluetooth sub-locks to work at the same time. It has a key-free design, RFID/remote unlocking;...
Page 6 Acceleration sensor Motion and vibration detection. Lora wireless gateway (optional) Used for peripheral JT126 wireless temperature and humidity sensor and JT709 Bluetooth sub-lock communication. Bluetooth unlock (optional) The mobile APP connects to the device via Bluetooth, unlocked by the Bluetooth channel. display screen (optional) The display screen shows the QR code, and the mobile phone scans...
Page 7 is one trip. Support 5 authorized VIP numbers VIP mobile phone number can support SMS command sending, SMS alarm receiving, etc. Support 9 alarms The alarm can be sent to the VIP Steel string cut, mobile phone number via short Swipe unauthorized RFID card message or sent to the platform via Unlocking...
Page 8 Reboot the device (it’s not configurable) After starting up, wake up for 10 minutes, and sleep when there is no other wake-up source; Vibration wake After detecting the vibration, wake up (can be configured to close) for 10 minutes, during which there is no other wake-up source, then sleep;...
Page 9 Built-in battery Rechargeable 15000mAH lithium battery Working temperature -20℃ ~ 60℃ Storage temperature -40℃ ~ 80℃ Relative humidity 5%~95% Waterproof and IP67 dustproof grade Average sleep current 2G : Enable SMS wakeup：3.3 mA Turn off SMS wakeup：382uA 4G : Enable SMS wakeup：Average current 3.173mA. Turn off SMS wakeup：Average current 1.584mA.
Page 10 10 / 39...
Page 11 Standard and optional accessories Standard Optional Name Picture accessories accessories Lock body ● (standard configuration) Lock body Same as above picture ● (Lora gateway) Cable (length of 35 cm) ● RFID Cards (two units) ● Micro-USB ● Configuration/charging cable Serial port configuration ●...
Page 12 JT126 Temperature and ● humidity sensor JT709 Bluetooth ● sublock Appearance Front view ①RFID card swiping sensing area ②Indicator light Blue light GPS - GPS positioning status indication Green light GSM - Cellular network communication status indication Yellow light LVS - Low battery indication Red light Green light...
Page 13 Rear view No powerful magnet on the back Back cover with powerful magnet cover (standard) (optional) Interior view of Back cover Open the back cover Internal view ①Power switch: Push the power switch to the ON position to the left, that is, start up; Turn OFF the power switch by pushing it to the right ②Micro-USB Interface：Micro-USB Configuration cable, which can be used to configure device parameters and charge internal batteries;...
Page 14 ID is used as the unique identification of the device in the platform. Device model : At present, JT701D is divided into 2G and 4G device models according to different cellular network communication modules.
Page 15 Do not directly plug the special double-post plug of the charging cable that comes with the adapter into the power socket, otherwise it is easy to cause indoor circuit short circuit or electric shock! Do not use unstable or unreliable power sources such as vehicle batteries to charge the JT701D device! Install the Micro-SIM Card Please confirm the cellular communication module used by the current device with Jointech’s sales staff.
Page 16 Instruction of double sim card working logic For users who use single sim card, just skip this instruction. Recent JT701D support dual sim card one standy. It means when one sim card is connected with nextwork, the other sim card won’t work.
Page 17 the sky. Lock rope up In sleeping mode or switch off. Wake it up by shaking or turn on power switch. Green LED Blink 3 times every one sec Connected Cellular network and reporting data Network communication and then off Blink once every 3 sec Not connect to Cellular network yet In sleeping mode or switch off.
Page 18 RFID card, Bluetooth, the buzzer will sound once every second, and the GPS blue platform, etc.) issued light unlock instructions, but did will continue to flash until the lock rope is inserted. Or if the lock not pull out the lock rope rope is still not inserted for more than 60 seconds, the buzzer will stop ringing, the GPS blue light will return to normal, and the...
Page 19 Preparation before configuration Micro-USB configure cable and connect to computer via USB port Connect to JT701D Connect to laptop USB port Open JT701D Assistant tool 19 / 39...
Page 20 Check the communication connection On the USBHID configuration interface, if you see JT700, it means that the communication is normal. Basic Configuration Query firmware version, device ID and battery power Click button, the terminal will return information such as ID number and version number. Terminal timing When the user is testing in the indoor environment, since the device is powered on for the first time and does not obtain the satellite positioning time service, the user can manually time the product through this button.
Page 21 Main IP/ Domain name, port, APN, APN account configuration Click Main IP， configure IP1 and its corresponding parameters. Contact Jointech Sales to obtain the accurate IP1 address, port, APN, APN account. Click 'Write' button to Write the configuration. Click "Read" to query the initial configuration of the device.
Page 22 For example, the parameters in the above figure indicate that after the device wakes up, it will upload location data at an interval of 60 seconds; during the wake-up period (fixed 10 minutes) if the device captures the wake-up source, such as continuous vibration, it continues to work; if the wake-up source is not captured, Then it enters sleep, sleeps for 30 minutes, the device RTC wakes up, and after uploading a piece of location data, it enters sleep again.
Page 23 The device is in a continuous working state, and the device remains in the tracking mode even after restarting, unless the customer actively turns off the tracking mode. When the remaining power is less than 5%, it enters the default deep sleep mode. Reference Working Hours 2G/4G JT701D Data Uploading Interval Working hours /Working Mode...
Page 24 As shown below: Local serial cable unlock: Open the configuration tool, connect JT701D, enters 888888, and clicks the "Write" button to unlock. After unlocking, the buzzer will sound for 3 seconds. Pull out either end of the lock rope to unlock.
Page 25 When the user gets the JT701D device, the two standard RFID cards have been registered as authorized unlocking cards. After the device is turned on, place the RFID card in the RFID induction area and swipe the card (the red box in the picture above), the buzzer will beep, then the motor will rotate, and the user can pull out the lock rope to unlock;...
Page 26 Check the check box behind the VIP number, to select the corresponding VIP number, and set whether it can receive SMS alarm. Turn on the phone or SMS to wake up the device It can be configured to wake up the device by authorized VIP number, telephone or SMS. By default, it is closed.
Page 27 Delete all authorization cards To delete all, select "Delete All", click "Settings", and send instructions to delete all RFID card numbers composed in JT701D. Geo fence function configuration Users in Mainland China cannot access Google Maps. Please set up the electronic enclosure area on the Joint Cloud Platform.
Page 28 Step3: Click: “Finish drawing”, So finished the drawing and begin to save the setting later. Please refer follow picture. Step4: Click “Save” button to save setting. So the software will send geo-fence command to the JT701D device. Explanation about other buttons: : Read the previous geo-fence setting in the map.
Page 29 Configure Alarm channel switch By default, the device opens all GPRS channels for alarms. All Close: Close GPRS and SMS channel alarm; GRPS: open GPRS channel alarm; SMS: Turn on SMS channel alarm; All Open: Open GPRS and SMS channel alarm; Read: Read the previous configuration Write: Write the current configuration Edit command configuration interface...
Page 30 JT126 Introduction The JT126 wireless temperature and humidity sensor can be matched with the JT701D smart electronic lock to upload the current temperature and humidity of the detected item to the platform, which is convenient for managers to discover in time whether the ambient temperature and humidity meet the requirements of the item storage Relevant regulations, and timely adjustments.
Page 31 Bind JT126 temperature and humidity sensor with JT701D Enter the 10-digit ID of JT126 into the JT701 binding temperature and humidity sensor label interface, click "Bind Flags", the binding is successful, the JT701D device, the buzzer will prompt. Unbind JT126 temperature and humidity sensor from JT701D Click "Clear Flags"...
Page 32 JT709 smart Bluetooth lock is a slave lock product developed on the basis of the existing product JT701 smart electronic lock. JT701D is the master lock and JT709BL is the slave lock. It can be applied to container/tank truck with one master and multiple slaves (multiple Door/multi valve) management application scenarios. Supporting remote change of product configuration parameters, with rechargeable lithium battery, it can be used repeatedly.
Page 33 00E017150000, the device ID is E017150000. Enter the device ID into the JT701 binding temperature and humidity sensor label interface, click "Bind Flags", the binding is successful, the JT701D device, the buzzer will prompt. Unbind JT709 from JT701D Click "Clear Flags"...
Page 34 34 / 39...
Page 35 To use the device in Jointech Cloud platform Login Please contact the sales to get login account in Jointech platform. Manage your asset in the platform Login Url: http://cloud.jointcontrols.cn:56081/ Please refer the software operation manual to register new devices, real track and track history playback etc.
Page 36 JT126 Temperature & Humidity sensor’s installation. Switch on JT126, place it with the asset to be monitored. If there is water in place, please protect the sensor from water, the sensor cannot soak in water. 36 / 39...
Page 37 JT709 Bluetooth Slave Lock’s installation 37 / 39...
Page 38 Device Maintenance The dirt, mud may penetrate from lock hole in long time outdoor use and cause device malfunction, the users is required to clean the device regularly, to help the device work for long. The maintenance steps is as below: 1.
Page 39 Contact us Hot line: 400-183-0755 Tel.: 0755-83236778 83237778 Add: 2nd F/L, Bldg 2, Tinwei business park, Liuxian 2nd Road, Bao'an District, Shenzhen, China Fax: 0755-26493511 E-mail: sales@joint-tracking.com 39 / 39...