NEC ELECTRA ELITE Manual page 8

H
o l d i n g C a l l s
NON-EXCLUSIVE HOLD
With a call in progress:
Press Hold.
NOTE 1: To retrieve a held call, press the flashing Line key or Conf key (internal calls).
NOTE 2: Calls on Non-Exclusive Hold can be retrieved from any multiline telephone with the held line
appearance.
NOTE 3: After a preprogrammed time, the held call will recall to the originating station. Once in a recall
condition, Exclusively Held calls can be retrieved from any station with the held line appearance.
T
r a n s f e r r i n g C a l l s
USING MANUAL DIAL
With a call in progress:
Press Transfer.
Dial station number.
Announce call (optional).
Replace handset.
NOTE 1: If the called station is busy, replace handset to initiate a camp-on. Unanswered camp-ons and
unscreened transfers will recall to the attendant telephone. After answering the recall, pressing
Feature 86 will transfer the call to the personal voice mailbox of the station number dialed.
NOTE 2: To return to the original party, press flashing Line key or Conf key.
NOTE 3: A Feature Access key or One Touch key may be assigned for DSS.
NOTE 4: To transfer a call directly to a personal voice mailbox, dial 7 after dialing the station number.
C
o n f e r e n c e
With a call in progress:
Press Conf.
Place second call (internal or external).
Announce conference.
Press Conf to establish conference.
NOTE 1: Repeat above procedure to add an additional party (maximum 2 outside or 3 internal parties).
NOTE 2: An unsupervised conference may be established by pressing the Conf key again, after the
conference has been established. The parties may continue to converse in private. Press the
flashing Conf key to return to the conversation. This feature is available if programmed
in your system by your system administrator.
6
EXCLUSIVE HOLD
With a call in progress:
Press Feature.
Press Hold.
USING DIRECT STATION
SELECTION (DSS)
With a call in progress:
Press Transfer.
Press programmed DSS.
Announce call (optional).
Replace handset.