Peimar PSI-X1P3000-HY User Manual page 14

3. Installation hypothesis
3.1. Packing check
Although Peimar inverters have passed rigorous controls and are tested before they
leave the factory, it is not excluded that they may be damaged during transport. Please
check that the packaging has not shown any obvious signs of damage; In the event that
this is the case, please do not open the box and contact your dealer as soon as possible.
3.2. Methods of installation and placement
Make sure that the inverter installation wall has enough tightness to support its weight.
Do not place the inverter with the input/output terminals in contact with other surfaces,
as these are not designed to support the weight of the inverter. Always place the inverter
horizontally during the installation phases.
1. Please install the device as shown in the figure below. Vertical installation is
recommended, or with a maximum inclination of ±5°. Never install the inverter
with a side-to-side tilt, horizontal position, or upside down position. Install the
inverter out of direct sunlight and avoid any snow accumulation.
14
EN