Related Manuals for BRITAX RÖMER BABY-SAFE PRO
Summary of Contents for BRITAX RÖMER BABY-SAFE PRO
- Page 1 BABY-SAFE PRO USER GUIDE BRITAX RÖMER Child Safety EMEA www.britax-roemer.com | contact@britax.com...
- Page 2 14 6 Use with pushchair......15 Secure infant carrier to pushchair....15 Release infant carrier from pushchair..... 15 7 Use in aircraft........16 In case of emergency evacuation....16 IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 3 Action 1. Demands action from you. 2. Defined sequence of actions. 3..Result of action P There is where you will find the result of a sequence of actions. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 4 Ensure that the product is not trapped between hard Secure and remove the child from the footpath-side. objects (car door, seat rails, etc.). Keep product away from moisture, wet conditions, liq- uids, dust and salt spray. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 5 Ensure that everyone in the vehicle has their seat- belts fastened. Ensure that the product is always secured when it is in the vehicle, even if no child is being transported. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 6 4. Guide the harness buckle 1 and the padded crotch 4 3. To check that it is locked in place, pull on the handle 2. through the recesses on the lower part of the insert for newborn babies 2. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 7 6 off the cover 7 of the infant carrier. If the shoulder straps are not adjusted correctly, P The infant carrier is ready. follow the steps below. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 8 Recesses 1. Pull the deflection rod 8 out of the snap-in hole 9. 2. Insert the deflection rod 8 into the snap-in hole 9 ac- cording to the baby's height. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 9 3. Attach the push button 4 to the infant carrier. The sunshade protects the child from the sun's rays. Adjusting the sunshade Sunshade Fold the sunshade 1 completely forwards. Remove sunshade Sunshade Infant carrier rim Plug-in tabs Push button IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 10 7. Place the shoulder straps 2 over the child’s shoulders. WARNING Risk of injury if child is secured incor- rectly. Make sure that the shoulder straps are not twist- ed or reversed. Harness buckle Adjustment belt Buckle tongues IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 11 Give the baby the opportunity to move around. Harness buckle 1. Open the harness buckle 1 by pressing the red button. 2. Take the baby out of the infant carrier. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 12 3. Set the handle 2 to position B (see "Adjust the handle", page 6). 4. Place the infant carrier on the car seat against the di- rection of travel. P Your baby is looking backwards. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 13 In the case of an emergency stop or accident, the unse- cured child seat may cause injury to other occupants in the vehicle. Always secure the infant carrier in the vehicle, even if no baby is being transported. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 14 1. Set the handle 1 to position B. 2. Press the unlock button 2 on the base station. 3. Lift the infant carrier. 4. Remove the infant carrier from the vehicle. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 15 5. Check that the infant carrier is securely locked in place by trying to lift the infant carrier. If the infant carrier does not detach from the pushchair, then the infant car- rier is securely locked in place. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 16 If this is the case, use a belt shortener as described below. Use belt shortener The belt shortener 6 is not included in the scope of delivery. This is available separately. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 17 6. Hook the aircraft seat belt 2 into the open slot of the belt shortener 6. P The aircraft seat belt 2 is shortened. P The aircraft seat belt buckle 5 is not in the dark green seat belt guide. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 18 Shoulder pads 8. Pull the shoulder pads 9 off the shoulder straps 6 via the buckle tongues 10. 9. Detach the cover 8 from the lower infant carrier rim 11. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 19 – The buckle tongues are only pushed out of slowly after pressing the red unlocking button. – The buckle tongues no longer lock in place. – The buckle tongues lock in place but not audibly. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 20 Do not dismantle the product. Prevent third parties from using the defective product. Cut through the shoulder straps. Remove the approved label. Please follow the disposal regulations applying in your country. IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
- Page 21 10 Contact If there are any questions, please get in touch: BRITAX RÖMER Child Safety EMEA www.britax-roemer.com contact@britax.com BRITAX RÖMER Kindersicherheit GmbH Theodor-Heuss-Strasse 9 89340 Leipheim Germany IP10244 | 1.0 | 2000040094 BABY-SAFE PRO P1068-1 BRITAX RÖMER...
Need help?
Do you have a question about the BABY-SAFE PRO and is the answer not in the manual?
Questions and answers