Connecting To A Computer; Using The Cradle - Dell AXIM X50 System Information Manual

To recover from a critically low battery:
1
Plug in the AC adapter or replace the main battery with a charged
battery.
2
Press the power button to power on.
If you remove the main battery, the internal backup battery can last for up to
30 minutes in "deep sleep" mode. Do not remove the main battery if the
backup battery power is low.
By default, the device turns itself off if it is not used for a set period of time.
See your device Owner's Manual for more information about setting the
amount of time for which the device can remain idle before it turns itself off.

Connecting to a Computer

CAUTION:
Before performing any of the procedures in this section, read and
follow the safety instructions on page 5.
You can connect your device to a computer either directly with a cradle or
with a sync cable. When you connect your device to a computer, you can
perform the following tasks:
Add programs to your device. See your Owner's Manual for
•
more information.
• Synchronize data on your device with data on your computer.
For information about synchronizing your data, see the following resources:
• "Using Microsoft
ActiveSync Help on your computer
•
ActiveSync Help on your device
•

Using the Cradle

NOTE:
Depending on the configuration of your device, the cradle is optional.
You can use the cradle to:
• Synchronize the data on your device with the data on your computer.
• Power the device with AC power to conserve battery power.
16
System Information Guide
® ®"
in your Owner's Manual
ActiveSync