Clabo VIRNA Technical Book page 17

D
Positioning
NOTE:
Forklift truck or trans-pallet should carry out the movement towards the place of positioning
and/or storage.
WARNING!
During this phase danger of rolling over and slipping.
WARNING!
During handling, take into consideration the height of the packaging and verify the accessibility
to openings and passages.
Do not lift the showcase more than 10cm from the ground.
3. Removing the packaging
Do not throw away any parts of the showcase packaging, but select them according to the type of
material (cardboard, wood, steel, polyester, etc.) and dispose of them according to the regulations in
force in the country where the showcase is used.
Keep the locking or resting device for subsequent movements of the display cabinet.
For unpacking and positioning the display case, follow the following procedure:

Unpack the showcase;
RECEPTION AND INSTALLATION
Figure 7: Unloading and Positioning
Figure 8: Max lift.
12