Table of Contents
Advertisement
4830 & 4832
Cleaning the machine
The machine surfaces and covers can be
cleaned when necessary with a damp cloth
and a mild soap. Remove lint and fluff from
parts and with a flat brush clean these parts:
• Take up lever and thread guide.
• Presser and needle bars.
• Bobbin case and needle plate areas.
Your machine should be periodically checked
by your local SINGER dealer for wear.
37
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 4830 and is the answer not in the manual?
Questions and answers
How do I install a regular foot (B) on my Singer 4830 C sewing machine. It currently has the quilting walking foot attached.
The provided context does not contain specific instructions for installing a regular foot (B) on a Singer 4830C sewing machine. However, general steps for installing a presser foot on a sewing machine typically include:
1. Turn off the sewing machine for safety.
2. Raise the presser foot using the presser foot lever.
3. Remove the current presser foot by pressing the release lever or unscrewing the foot holder.
4. Align the regular foot (B) under the presser foot holder.
5. Lower the presser foot holder until the foot snaps into place or screw it securely if needed.
6. Ensure the foot is firmly attached before starting to sew.
If further details are needed, refer to the machine's manual.
This answer is automatically generated
Changing the tension dial does not seem to have any effect on my too loose stitches
If changing the tension dial does not fix too loose stitches on a Singer 4830 sewing machine, check the following:
1. Threading: Ensure the machine is threaded correctly, including the bobbin and needle threads.
2. Bobbin placement: Make sure the bobbin is inserted properly and the thread is feeding in the correct direction.
3. Needle: Check that the needle is not bent or dull, and is properly installed.
4. Presser foot: Confirm it is lowered before sewing to apply correct pressure.
5. Thread quality: Use good quality thread suitable for the fabric.
6. Fabric type: Adjust handling for stretchy or slippery fabrics as they may affect stitch formation.
If all these are correct and the issue persists, the machine may need servicing.
This answer is automatically generated