Inserting The Bobbin - Singer 1507 Instruction Manual

Inserting the bobbin

When inserting or removing the bobbin, the needle must be
fully raised.
- Open the hinged cover (1).
- Hold the bobbin case with one hand. Insert the bobbin so that
the thread runs in a clockwise direction (arrow) (2).
- Pull the thread through the slit and under the finger (3).
- Hold the bobbin case by the hinged latch (4).
- Insert it into the shuttle (5).
Attention:
Turn power switch to off ("O") before inserting or removing
the bobbin.
1
3
11
2
4
5