JTX Fitness STRIDER X7 User Manual page 10

Step Three: SWING ARMS and PEDAL SUPPORT
Insert the Long axle (56) through the Handlebar post (4) then attach the Swing tube (7L/R)
on the Long axle (56) with wave washer (21), D-shape washer (24), flat washer (60), spring
washer (25) and Hex screw (26). Do not fully tighten yet.
Fix the Pedal support(8L/R) on the Crank (20) with Hex screw (26), Spring washer (25), Flat
washer (60), D-shape washer (24) and Wave washer (21). Do not fully tighten yet.
Connect the Swing tube (7L/R) and Pedal support (8L/R) together with Screw (37), Flat
washer (38), Flat washer (30) and Nylon nut (31), then lock Hex screw (26), Screw (37) and
Nylon nut (31) tightly.
Secure the Pedal (34L/R) on the Pedal support (8L/R) tightly using the Hex screw (33), Flat
washer (12) and Nylon nut (13).
PAGE 9