Creating A Host Group - Dell POWERVAULT MD3600F Owner's Manual

Creating a Host Group

1 In the AMW, select the Mappings tab.
2 In the Topology pane, select the storage array or the Default Group.
3 Perform one of the following actions:
• Select MappingsDefineHost Group
• Right-click the storage array or the Default Group, and select
DefineHost Group from the pop-up menu.
4 Type the name of the new host group in Enter new host group name.
5 Select the appropriate hosts in the Select hosts to add area.
6 Click Add.
NOTE:
Remove.
7 Click OK.
The host group is added to the storage array.
Adding a Host to a Host Group
You can add a host to an existing host group or a new host group using the
Define Host Wizard. For more information, see "Defining a Host" on
page 90.
You can also move a host to a different host group. For more information, see
"Moving a Host to a Different Host Group" on page 94.
Removing a Host From a Host Group
You can remove a host from the Topology pane on the Mappings tab of the
Array Management Window. For more information, see "Removing a Host
Group" on page 94.
To remove hosts, select the hosts in the Hosts in group area, and click
Configuration: About Your Host
93