Pass-Through Modules; Dell 10 Gbe Kr Pass-Through I/O Module - Dell POWEREDGE M1000E Configuration Manual
Blade server
Hide thumbs
Also See for POWEREDGE M1000E:
- Configuration manual (232 pages) ,
- Getting started (224 pages) ,
- Reference manual (135 pages)
Table of Contents
Advertisement
Pass-Through Modules
Dell 10 GbE KR Pass-Through I/O Module
The 10 GbE KR pass-through module supports 10 Gb connections and
provides a direct connection between the optional internal Ethernet KR
mezzanine card or KR network daughter card in the blade and an external
Ethernet device. This module has 16 external SFP+ ports on the front panel
and sixteen 10 GbE KR internal ports through the backplane. This module
enables you to use optical SFP+ (short reach or long reach) and direct-attached
copper (DCA) SFP+ modules.
The Ethernet pass-through module is hot-swappable and may be installed in
Fabric A, B, or C. The pass-through module does not support 1G mezzanine
or network daughter cards in blades.
75
Configuring the I/O Modules
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the POWEREDGE M1000E and is the answer not in the manual?
Questions and answers