Furrion Everchill WD-282FWDC-6 Manual

Purpose
This document outlines the procedures for proper storage of Furrion refrigerators.
Proper Storage Information
Properly storing the refrigerator can prevent irregular cooling performance and help combat component
damage. If the refrigerator is not properly turned off (stored) it continues to operate while in storage,
causing the appliance to overwork in extreme conditions beyond its intended design. The refrigerator
control then detects an erroneous operating parameter/condition and locks out the systems to protect itself
until power is reset. To prevent system lock-out, perform the following proper storage steps.
Failure to follow proper storage procedures for the refrigerator could result in product damage and/or
Proper Storage Procedures for Model WD-282FWDC-6
For additional information, use the video link detailing the procedure:
https://support.lci1.com/videos/properstorage-of-an-everchill-model-wd-282fwdc-6-refrigerator
or scan the QR code.
If the unit/appliance is in storage (closed up/not in use) the refrigerator model # WD-282FWDC-6 should
always be turned off using the controls of the refrigerator. The battery disconnect is NOT sufficient for
ensuring the refrigerator is off. Physically turning off the refrigerator is required per the below instructions.
1.
Open the refrigerator door and locate the user control panel (Fig. 1A) at the top of the
refrigerator cavity.
2.
Press and hold the "SET" button (Fig. 1B) for 10 seconds.
A
Rev: 08.23.24
PROPER STORAGE OF AN EVERCHILL MODEL
WD-282FWDC-6 REFRIGERATOR
voiding the warranty.
REFRIGERATORS
Fig. 1
Page 1
B
CCD-0008587