Xiaomi Mesh System AC1200 User Manual page 6

Method 2 Network Configuration via Web Browser
1. Check the Wi-Fi name on the label at the bottom of the router and
then connect your phone or computer to the Wi-Fi.
2. Then an automatic redirection will take you to the network setup page.
If not, open the web browser and enter miwifi.com or 192.168.31.1.
3. Follow the instructions on the setup page to complete the network
configuration.
Note: Contact your Internet service provider to get the details if you are
not familiar with the Internet connection type.
4. After the configuration of the router is completed, the Wi-Fi module
will restart. Try to search the Wi-Fi again later.
Notes:
· For the product of 2-pack or 3-pack version, the routers in the box
have been pre-paired when leaving the factory. When the network
configuration of one router is completed, just power on the rest of
routers and they will Mesh networking automatically.
·
After completing the network configuration, you can also add the
router via the Mi Home/Xiaomi Home app. Refer to the QR code in
the Method 1 to download and install the Mi Home/Xiaomi Home app.
Make sure that the settings of country or region via the web browser
are consistent with the country or region selected in the Mi Home/
Xiaomi Home app; otherwise, adding the router will be failed.
Wi-Fi Name: xxxx_minet_xxxx
SN: XXXXX/XXXXXXXXXX
MAC: XX:XX:XX:XX:XX:XX
05